Touch Screen Precision  Medical Heat Sealer. The integrity of a heat seal can never be more critical than for medical applications, and the HSX-1 provides the technology and reliability to deliver time after time. An intelligent controller and touch screen user interface stores multiple settings for later recall, and controls settings to the extent that the high quality seals produced, when peeled, leave a consistant residue on the clear webb. The HSX-1 is fast becoming the new standard equipment for highest quality seals in medical packs. Produces seals 5 – 25 mm wide and up to 400 mm long.

  • The HSX-1 is used as both a semi-production heat sealer and for determination of heat seal threshold.
  • Choose heat sealing bar configuration, either single (upper) or dual (upper & lower, meets ASTM F2029)
  • User can easily change sealing bar for various surface areas or surface f inishes
  • Accurate and repeatable seals due to precision ground sealing faces and advanced jaw guidance system
  • Versatile applications for flexible materials, blister packs and pots
  • Low Maintenance - 12 months between calibrations
  • 5.7" touch screen controller for precise control of temperature, pressure and dwell time.
  • Memory recipe function for quick and accurate recall of settings
  • Precise pressure calibration of standard surface area jaw face
  • Jaws constructed in aluminum and silicon with precision ground faces
  • Range of jaw face surfaces including Matched Crimp and Teflon Coating
  • Auto cycle feature for greater user convenience with multiple samples and cycle counter
  • Seal Length: 400 mm max.
  • Seal width: 5 to 25 mm
  • Controller
    • 5.7 in Touch Screen TFT LCD 320 x 240 colour display
    • IP565 rated
    • Footswitch operation
  • Temperature Control Range: Ambient to 300C
  • Operating Accuracy:
    • ±2C
    • Single (Upper) sealing jaw temperature control, or Dual (Upper & Lower) sealing jaw temperature control
    • User def inable alarm for over/under set level
  • Pressure Range:
    • 0 – 100 psi (6.8 bar, 689 Kpa), via Electronic pneumatic E/P regulator
    • Accuracy ±1%
    • User def inable alarm for over/under set level
    • Supply via clean and dry compressed airline or bottled air/nitrogen at 90 – 100 psi
  • Dwell Time Range: 0.1 – 99.9 sec., Resolution 0.1 sec
  • Auto Cycle & Delay Time:
    • Delay Time Range: 0.1 – 99.9 sec
    • For automatic cycling of sealing bars used in manual production environments.
    • Assists with correct alignment of sample
    • Electronic processor controlled
  • Jaw Guidance System: Advanced jaw guidance system guarantees even closure, resulting in consistently high quality seals.
  • Pre-Heat Cycle
    • User definable variable time interval, electronic processor controlled
    • Cycle Counter Electronic counter for seals completed
  • Sealing Jaws
    • Standard flat jaws 25 mm x 400 mm, constructed in aluminum with precision ground face
    • Lower sealing jaw with precision ground silicone rubber face. (See options below)
  • Environment: 5 – 50C ambient operating temperature, RH 75% max (non-condensing)
  • Power: 240V AC 50/60 Hz (110V AC voltage available on request)

Options:

  • Single (Upper) sealing jaw temperature control or Dual (Upper & Lower) sealing jaw temperature control
  • Sealing jaw dimension/profile as required ( inc. Matched crimp 120 deg x 1.8 mm pitch)
  • Sta inless Steel sealing jaws
  • Teflon Coated Tape or Teflon Coated Jaws
  • Blister Pack Simulator sealing jaw
  • Additional Blister tray
  • Digital thermometer with s/s band probe to check jaw temperature (see image)